|
|
Pad Printing Inks for Any Application
|
TPR
Tampastar
[more
info]
|
PROPERTIES: This glossy pad
printing ink is distinguished by particularly high resistance. Being a
one-component ink, it is very quick-drying and easy to process. To
raise surface stability, or other stabilities, hardeners can be added.
APPLICATION AREA: This pad printing ink can be widely used. On rigid
PVC, polystyrene, ABS, acrylic glass, polyester, duroplasts and
varnished substrates. Because of its high resistance, it can also be
employed for products subject to high mechanical stress, the effects
of hand perspiration or cleaning agents, such as control knobs, camera
housings etc. Under certain circumstances, this ink can also be
suitable for polyacetal materials
|
|
TPU
Tampapur
[more info] |
PROPERTIES: High-gloss,
quick-hardening, two-component ink for high-demand adhesion,
scratch-resistance, mechanical and chemical resistance. Using a
matting powder will vary the degree of gloss.
APPLICATION AREAS: Difficult to print materials such as pretreated
polyethylene, polypropylene, duroplasts, metal and varnished
substrates, but also polyurethane, polyamide, melamine resins, and
powder-coated surfaces and similar. Can also be usd for polyacetal
under certain conditions.
|
TPL
Tampaplus
[more info]
|
APPLICATION AREAS: Fast
drying pad printing ink distinguishes itself by having good
printability in a closed cup system. It is especially suited for
printing on high quality products such as cosmetic packaging,
housings, and other itams requiring high resistance, in industrial
applications, and also in the field of promotional items. |
TPP
Tampaplus
[more info] |
PROPERTIES: Glossy ink with
good covering ability, universally applicable as a quick-drying, one
or two-component system.
APPLICATION AREA:
This all round ink is usable on polyamide, ABS, SAN and rigid PVC,
polycarbonate, metals, varnished substrates, pretreated polypropylene,
polyethylene, polyurethan, polyester and duraplasts. It is therefore
highly suitable for the entire multiplicity of gift articles and under
certain circumstances also for polyacetal materials such as Hostaform
C or Delrin.
|
GL
Glass Ink
[more info]
|
PROPERTIES: Silky gloss,
quick-curing two-component ink for printing on glass offering good
resistance to dishwashing machines. Heat-curing further raises the
print-resistance.
APPLICATION AREAS: Glass and ceramics for cosmetic and promotional
items, etc. Also usable on many metals such a chromed parts and on
varnished substrates where this special ink provides good adhesion
. |
TPY
Tampapol
[more info] |
PROPERTIES: High-gloss ink
type with high covering ability and good resistance to many chemicals
such as oils, greases, alcohol, gasoline. Hardeners can be added to
further raise surface stability and solvent resistance.
APPLICATION AREAS: Tampapol TPY is primarily for printing on packaging
produced from pretreated polyethylene and polypropylene or rigid PVC.
Also widely used for duroplasts, metals, and varnished surfaces.
|
TPT
Tampatech
[more info] |
PROPERTIES: High gloss, with
good opacity. Resistant to chemicals, fast curing two-component
system. This ink has a 16 hour pot life.
APPLICATION AREAS: Tampatech TPT is excellently suited to print onto
pre-treated polyethylene (PE) and polypropylene (PP), but also onto
ABS, polyamide (PA), melamine resins, metal, anodized aluminum, coated
substrates, powder-coated surfaces, wood, and glass.
|
PP
Maraprop
[more info]
|
PROPERTIES: The satin gloss and
fast drying ink, Maraprop PP, is mainly used when printing onto
polypropylene, for example to decorate advertising products or to mark
injection molded parts.
APPLICATION AREAS: Its good adhesion enables prints on many non
pre-treated polypropylene materials. Mostly a pre-treatment of the
surface by flaming, by Corona discharge or by applying our Special
Primer P2 is not necessary.
|
General Purpose Pad Printing Inks
FX-Maraflex, SR-Marastar,
PY-Marapol, PU-Marapur
Competitively priced pad printing inks.
FX,
SR, PY, and
PU are
great cross over inks. They are both screen and pad printing inks. The
only change is when pad printing, use pad ink auxiliaries and additives.
The ink meets toy safety standards of EN-71 part 3. These inks can be
matched in system 21 and Marabu mix.
FX-Maraflex-Used
as a pad ink for printing stress balls.
SR-Marastar-Highly
versatile. Includes a very high opaque white. Also high resistance to
solvents and has proven successful in passing climatic tests. Use to
print an ABS, POM, Aluminum, CAB, CA, PA, PC, and many others.
PY-Marapol-A
single component ink for printing on pre-treated polyethylene and
polypropylene PVC, duroplastic and many others. It has a very high gloss
finish, excellent covering capacity, and rapid drying. Ideal for
high-speed automatic presses.
PU-Marapur-Versatile
two component ink for packaging materials and molded components made of
pretreated polyethylene and polypropylene. Also for metals, glass,
acrylic, melamine, phenolic resins and many others. Has a high
resistance to chemicals, oils, grease, and solvents. Good for outdoor
applications. High covering and very high gloss. |
|
920 Lemon 
932 Scarlet Red
954 Medium Blue 
980 Black 
922 Light Yellow
934 Carmine Red
956 Brilliant Blue
970 White 
924 Medium Yellow
936 Magenta
960 Blue Green 
926 Orange
950 Violet
962 Grass Green 
930 Vermilion 
952 Ultramarine Blue
940 Brown 
191 Silver
192 Rich Pale Gold
193 Rich Gold
429
Process-Yellow
439 Process-Red
459 Process-Blue
489
Process-Black